‘A competent person is a person who can demonstrate that they have sufficient professional or technical training, knowledge, actual experience, and authority to enable them to: (1) carry out their assigned duties at the level of responsibility allocated to them (2) understand any potential hazards related to the work (or equipment) under consideration (3) detect any technical defects or omissions in that work (or equipment), recognise any implications for health and safety caused by those defects or omissions, and be able to specify a remedial action to mitigate those implications’.
So clearly use of ladders and stepladders requires sufficient professional or technical training but which training course? There are many courses out there some better than others. Some companies simply expect their Health and Safety manager to create a training course because the equipment is so simple. Some think a tool box talk is sufficient but most don’t bother with anything at all. These approaches hold varying degrees of risk to both the user and the organisation and it is from the point of view of the organisation that I will initially address the question of “why ladder Association Training?”
We know that we must adequately train our employees but how do you measure adequate? It’s tricky and is a balance between risk and cost.
- We can do no training, this is free and there is a massive risk of injury, prosecution and a civil suit which we will lose. That clearly works out to be rather expensive.
- We can conduct in-house training undertaken by a qualified Health and Safety professional. This training course has not been independently measured, the Health and Safety manager is not a qualified Ladder and Stepladder instructor, no manufacturers were involved and therefore the trained would not be aware of the direction that the industry is moving, new innovations, changes to standards etc. Frequently with this sort of training it is just a case of following the HSE guidance. If there were an incident how would we prove that the training was adequate? That the course corresponded with the very latest industry best practice? We couldn’t, so again we are in danger from prosecution and a civil suit. At least we would have an argument but it would be better to have proof.
- We could use a training company that has created their own Ladder course. This is basically the same as the above because without involvement from the manufacturers we do not know if what we are saying is technically correct and the course has not been approved.
- We can use The Ladder Association’s network of training centres to conduct the training for us. A Ladder and Stepladder User course for 8 people takes just 4 hours though it is an intensive session. It is possible to train 16 people in a single day. This makes it inexpensive and efficient. This is the correct choice but why?
The Ladder Association began as the British Ladder Manufacturers Association which tells you who the founding members were, yes, manufactures. This provides the proof that it is adequate. This is what we need and it is brilliant value for money.
The ladder association has grown since 1947 when it began, actively welcomes members from all sectors and is made up of expert committees. This means that when something gets into the training course material it has been approved by both professional training organisations and the manufacturers themselves via the training committee and approved again by the executive council. The Ladder Association works directly with the HSE to ensure that the HSE are fully informed of any innovations, developments and guidance. The HSE have in fact given their full support to the work of the ladder association. The Ladder Association code of practice contains a forward from the HSE stating this fact and that is why it is PROOF. Ultimately if you want to get it right, protect your people and your business that the only reliable choice is Ladder Association training. Manufacturer members of the Ladder Association include-
- Ladder and Fencing industries (Newent) Ltd
- Lyte Industries (Wales) Ltd
- Chase Manufacturing Ltd
- Yeoman Pressings Ltd
- Youngman Group Ltd
- Zarges (UK) Ltd
- ABRU Ltd
- Clow group Ltd
- Globe Ladders
Clearly these guys know what they are talking about.
Training members include-
- OTJ Training
- Kentec Training
- HSS Training
- Astra Access Safety Training Ltd
- Facelift Training
- Generation Hire and Sales
Along with many others and again we know what we are talking about so you get the very best of both worlds.
Ladder Association training centres have to meet very specific criteria and are audited to ensure ongoing compliance. Instructors are trained over the course of a week having had to meet stringent entry criteria to even get onto the instructor course. If they pass that they also have to undertake 2 sessions with a senior instructor mentor and successfully prove themselves before being deemed competent to train the Ladder Association training course. Trainers are also audited and are subject to unannounced visits again to ensure standards are kept up.
Ultimately, if you want the right training, training that is measured, tested and approved by both manufacturers and the HSE, then it has to be from the Ladder Association. Everything else is just a waste of money.
OTJ Training conduct Ladder Association Training all over the country at your premises or at our training centre in Gloucestershire. We are exceptional value for money and everyone goes away surprised at how useful and interesting the training was so give us a call on 01531 821 779 or visit us at www.otjtraining.com and we will make sure that you have everything that your guys get the training that they need keeping both them and you safe.